|
Product Details:
|
| Name: | Wire Twister Machine | Take Up Bobbin: | Diameter 630 Mm |
|---|---|---|---|
| Stranding Section Area: | 0.35-6mm2 | Wire: | Bare Copper Wires, Tinned Wires, Silver Jacketed Wires And Enameled Wires,double Twisting For Core Wires. |
| Direction Of Lay: | Free To Left Or Right | Pitch: | 11.6-100mm(34classes) |
| Machine Power: | 7.5kw | Operation Mode: | Plc Touch Screen Control |
| Highlight: | double twist buncher,double cable machine |
||
Single Shaft Wire Twister Machine / PLC Control Plastic Extrusion Line
Wire Twister Machine Introduction :
New arrival, mainly apply for stranding the electrical wire and automobile wire and other small section area conductor.
Wire Twister Machine Characteristics:
1.Use carbon fiber bow, strong rigidity, uneasy-transformation, small shock, light weight, reduce air friction for high quality of conductors;
2.Use synchronous belt drive, just to replace the guide wheel to change the lay distance, easy to operate.
3.Use spindle to calculate meters, only 0.01% error for a certain wire&cable.
4.Use PLC automatically lubricate spindle bearing, avoid injecting too much or too little grease. Get rid of unnormal noise and worn, cost down for maintenance.
Wire Twister Machine Specifications:
| Equipment models | FC-500B | FC-650B | FC-650C | FC-800B |
| Twisting usage | Apply for twisting aerospace, medical equipment, cellphone and ultra conductor(above seven pcs of bare copper wires, tinned wires, silver jacketed wires and enameled wires),double twisting for core wires. | |||
| Single wire dia(mm) | 0.08-0.45 | 0.15-1.04 | 0.12-0.52 | 0.38-1.70 |
| Stranding section area (mm²) | 0.05-2.5 | 0.35-6.0 | 0.30-4.0 | 1.0-16 |
| Core wire single wire dia(mm) | 0.5-1.5 | 0.5-3.0 | 0.5-2.0 | 1.0-4.0 |
| Core wire stranding outer dia(mm) | 1.0-3.5 | 1.0-6.0 | 1.0-4.0 | 2.0-8.0 |
| Pitch(mm) | 6.3-52.3(24classes) | 11.6-100(34classes) | 11.6-100(34classes) | 23-147(20classes) |
| Direction of lay | Optional for right or left | |||
| Outer dia*bore*outer width | OD500 ID56 H375 | OD630 ID56 H475 |
OD630 ID56 H475 OD630 ID127 H475 |
OD800 ID80 H600
|
| Max rotating speed | 3000rpm(6000twist) | 2000rpm(4000twist) | 2400rpm(4800twist) | 1500rpm(3000twist) |
| Main motor power | 5.5KW | 7.5KW | 11KW | 15KW |
| Inverter power | 5.5KW | 7.5KW | 11KW | 15KW |
| Tension control method | Touch screen +PLC+ magnetic powder clutch, ensure the constant tension from empty to full bobbin | |||
| Magnetic powder clutch | 1.2kgf | 5kgf | 2.5kgf | 10kgf |
| Protection |
automatically brake/stop 1)wire inside and outside is broken 2)the preset length is arrived |
|||
| Brake mode | Electromagnetic brake | |||
| Traversing method | Rolling wire with ring drive units, winding pitch and breadth are adjustable | |||
| Operation mode | Touch screen operation | |||
| Dimension(mm) | 2680L 1250W 1500H | 3300L 1550w 1800H | 4600L 2000W 2000H | |
Contact Person: Nicole
Tel: +8618914960689
Fax: 86-512-57699189
