|Name:||Cable Twisting Machine||Feature:||Silent|
|Stranding Section Area(mm²):||0.05～2.5||Core Wire Single Wire Dia(mm):||Φ0.5～1.5|
|Core Wire Stranding Outer Dia(mm）:||Φ1.0～3.0||Pitch(mm):||6.3-52.3(24 Classes)|
wire extrusion machine,
wire stranding machine
Silent Cable Twisting Machine , Plc Programmer Pvc Wire Making Machine
Cable Twisting Machine Advantages
Cable Twisting Machine Details
|Twisting Usage||Apply for the twisting of above seven pcs of bare copper wires, tinned wires, silver jacketed wires and enameled wires),double twisting for core wires.|
|Single Wire Dia(mm)||Φ0.08～0.45||Φ0.15～1.04||Φ0.38～1.7|
|Stranding Section Area(mm²)||0.05～2.5||0.35～6.0||1.0～16|
Core wire single wire dia(mm)
Core wire stranding outer dia(mm)
|Pitch(mm)||6.3-52.3(24 Classes)||11.6-100(34 Classes)||20-160(34 Classes)|
|Direction of Lay||optional for right or left|
Outer dia*bore*outer width
|Φ500*Φ56*375 Φ500*Φ127*375||Φ630*Φ56*475 Φ630*Φ127*475||Φ630*Φ56*475 Φ630*Φ127*475|
|Max Rotating Speed(rpm)||3000RPM(6000TPM)||2000RPM(4000TPM)||1600RPM(3200TPM)|
|Main motor power||5.5KW||7.5KW||11KW|
|Tension control method||Touch screen+ PLC+ magnetic powder clutch, ensure the constant tension from empty to full bobbin|
|Magnetic powder clutch||1.2kgf||5kgf||10kgf|
|Protection||automatically brake/stop 1)wire inside and outside is broken|
2)the preset length is arrived
|Brake mode||Electromagnetic brake|
|Traversing method||Rolling wire with ring drive units, winding pitch and breadth are adjustable|
|Operation mode||Touch Screen Operation|
1.Material: low carbon steel welded together.
2.Structure: the body by annealing and aging, to eliminate internal stress, and then boring by a precision boring machine to forming a molding.
1.Bunching Entry position: facing to the front door, at the right side of the machine (can be customization according to customer requirements to change to the left side).
2.Bunching Entry Mode : from the pay-off device through the disconnection sensing area, first to the total sub-line board (sub-hole by 1 +6 +12 + ... distribution), through first pressure mold, then the second Pressure mold, after entering the right spindle within the wire guide wheel. From the aluminum arch with porcelain ring and then into the left spindle within the wire guide wheel, and then through the center corner’s guide wheel to the leading wheel, Final to the aligner’s guide wheel to cable laying (see wire bunching entry pattern diagram)
1.Material: 40Cr steel forging after quenching and tempering treatment.
2.Accuracy: The shaft core outer face diameter and the bearing end face are ground to ensure concentricity and verticality with the axis.
3.Dynamic balance: Standard of G2.5 (0.03g of weight difference)
1.Material:¨ ZL104 / ¨45# steel
2.Accuracy: All end faces are positioned relative to the locating holes(less than 0.03 grams)
3.Dynamic balance: Accuracy of G2.5 (0.03 grams of weight difference)
1.Material: ¨ Japan imported SK5 ¨ Imported fiber glass
2.Shape: special appearance, reduce the wind resistance.
3.Weight tolerance : less than 0.03 grams per pair
1.Material: # 45 steel finished with heat treatment HRC30-40.
2.Hard chrome plated on the surface, not easy to wear
1.Material: ductile iron QT42-10.
2.Processing: CNC machine tooling
3.Accuracy: one processing hole end molding, to ensure concentricity.
1.Lubrication method: butter lubrication
2.Butter Model: LGMT2
3.Sealing method: mechanical oil retaining ring, keep the machine clean inside
Contact Person: Nicole